Every order comes with FAST, FREE Shipping, plus a FREE 365-Day Return Policy! More About Shipping & Returns
UP TO 50% OFF This Month's Special Offer, Only 3 Days!
Sikkens 5086005 Cetol HLS Plus Teak 1 Litre

Sikkens 5086005 Cetol HLS Plus Teak 1 Litre

$8.00 $25.00 Save: 68% off Last 24 hour !
AUTHENTICITY GUARANTEED

Authenticity is the foundation of our business, and every item we sell is inspected by our expert team. Our authenticators are the most experienced and highly trained in the business. In addition, we source our products only from trusted suppliers.

IN STOCK & READY TO SHIP

We hold and authenticate inventory on site so you don’t have to wait to receive product from a 3rd party seller. Processing and order verification typically occur 2-4 business days prior to shipping.

RETURNS ACCEPTED

We offer free global returns for all eligible and full-priced items. Final sale items will be noted on the product page. Please see return policy for further details.

Description

Description & Details

Sikkens 5086005 Cetol HLS Plus Teak 1 Litre Description

Sikkens 5086005 Cetol HLS Plus Teak 1 Litre

Cetol HLS Plus is a high quality formulation which is ideal forexterior wooden surfaces. It works to resist UV light, surfacemould and algae as well as peeling and cracking. The Micro pourousconstruction gives a moisture control system whilst allowing theattractive wood grain to remain visible. Choose between a widerange of colours for the finish and protection you desire!

Colour: Teak

Size: 1 Litre

Details

OPC: PQSHFQ
Brand:
Sikkens
Codes: 8711115289182 (EAN)
MPN: SIKCHLSPT1L
Links: Sikkens Paint
External product information

Disclaimer: The information below is provided by various external sources and should be used as a guide only.

Detailed product information

Logistics data

Products per pallet560 pc(s)
Layers per pallet7
Products per pallet layer80 pc(s)

Features

Finish typeSemi-gloss
Volume1 L
Suitable for outdoor useY
Colour nameTeak
Best usesWood
Minimum drying time4 h
Maximum drying time6 h
How to useConditions : Do not apply if there is a risk of rain, or when air/substrate temperatures are below 5oC or above 30oC duringapplication or drying periods. Protect from frost and rain until dry.Failure to meet these requirements may adversely affect the drying, visual quality and durability of the finish.Initial Procedure Ensure product is thoroughly stirred before and during application, otherwise sheen and colour variations may be experienced.Cetol HLS plus is supplied ready for use. Do not thin.Applying the product For best results use a good quality, long-haired, soft bristle brush. On new work, where practical, the initial coat should beapplied all round prior to fixing. P ay special attention to any areas of exposed end grain, tops and bottoms of doors, andundersides of cills.The product should be applied in a full flowing coat (working well into joints, and ensuring end grains or sawn timbers are saturated with product). Excess surface material should be re-distributed after 5-20 minutes (depending on conditions), using a dry brush (which should be periodically dried with a lint-free cloth) and the minimum number of strokes required to produce an even overall colour. This ensures that the first coat satisfies the porosity/absorption of the timber.Allow a minimum of 18-24 hours drying time. Where appropriate (e.g. for joinery items such as windows and doors), the firstcoat should be carefully denibbed using a fine grade nylon abrasive pad or a fine grade (P240 or finer) wet or dry silicon carbide abrasive paper, in the direction of the grain. Do not break through the surface coating. Remove all dust.Cetol HLS plus should be applied in a full flowing manner in the direction of the grain, using the minimum number of brush strokes necessary to produce an acceptable finish. Avoid overbrushing, as this will reduce the protection afforded.Subsequent coatings should be applied as soon as possible after the previous coat has dried, but no sooner than 12-24 hours, in order to provide full protection. In any event this period should not extend beyond three months, otherwise additional preparation and coats may be necessary. If applied to exterior timber and the contract is of long duration, it is suggested that a further coat be applied prior to handover to make good any weathering during the construction period
Product formReady mixed
Volatile organic compounds (VOC) content400 g/l
Suitable for indoor useN
Recoat after (min)18 h
Recoat after (max)24 h
Number of coats noteFinishing coat - new /bare large surface areas - 3 coats; Maintenance - 1 coats unless surfaces are excessively weathered; Base stain - new/bare timber - 1 coat prior to Cetol Filter 7 Plus or Cetol THB Plus
Tool cleaningClean brushes and equipment with brush cleaner immediately after use. If spilled, Cetol HLS plus may be removed immediately while still wet, using white spirit
Surface preparationGeneral: Ensure the timber surface is suitably prepared, clean and dry, with dust, dirt, wax atnd grease removed and allowed to acclimatise to its end-use environment. The moisture content should not exceed 18% prior to coating.Degrease any exposed bare timber surface by wiping with a cloth dampened in a suitable solvent. Certain timber species containhigh levels of natural wood extractives or exudates and some softwood can be highly resinous. Resinous deposits should be removed with a scraper. Any remaining residues should be removed using a lint-free cloth dampened with a suitable solvent, frequently changing the face of the cloth. Allow solvent to evaporate fully before overcoating. The use of both eye and hand protection is strongly advised.We do not recommend the use of 鈥渒notting agents鈥 with translucent finishes as they are not always fully effective in 鈥渟ealing in鈥 resin,the presence of knots is often highlighted and adhesion of coatings can be impaired.When filling, be sure to use fillers specifically designed for use with timber. General or all purpose fillers are not suitable, particularly on external areas, as they cannot cope with timber movement and work loose.New timber: Where a superficial application of preservative to softwood and hardwood is deemed necessary, such as timbers in Durability Class3 or lower, use Cuprinol Wood Preserver Clear (BP). For Class 4 (in ground contact) and 5 (marine), use pre-treated wood specific for these conditions. Preservative pre-treatments must be fully dry before the application of Cetol HLS plus. Do not use on substrates which have had water-repellent preservative pre-treatments applied. Where possible, the first coat should be applied all round prior to fixing. Only use non-ferrous screws, nails and fixings.Base stained / Primed : Denib using a fine grade nylon abrasive pad or a fine grade (P240 or finer) wet or dry silicon carbide abrasive paper, in the direction of the grain. Do not break through the surface coating. Remove all dust.To ensure optimum durability and uniformity of appearance, we recommend the use of a coat of Cetol HLS plus prior to finishing.Note: Where there is localised damage, or deterioration has occurred as a result of exposure of the factory coating for longer than 3 months, affected areas should be thoroughly sanded back to a sound substrate.All damaged or decayed timber must be removed and replaced, cutting at least 25mm into sound timber. When splicing in new sections of timber, consideration should be given to the use of a timber species whose natural durability is sufficient. Brush apply two coats of Cuprinol Wood Preserver Clear (BP) to saturation. Ensure timbers are thoroughly treated, especially any end grain sections, and are fully dry before splicing in. Secure with non-ferrous fixings and fill all voids surrounding the spliced-in area with a suitable repair compound such as Dry-Flex from Repair Care
How to storeStore in cool, dry, frost-free conditions
Volatile organic compounds (VOC) content labelling systemHigh (25 - 50%)
OpacityTransparent
Number of coats (max)3
Number of coats (min)1
Recommended layer thickness (dry)10 渭m
CompositionSolvent-based
Surface coverage (min)7 m2/L
Surface coverage (max)14 m2/L

Packaging data

Package depth108 mm
Package height132 mm
Package width108 mm

Packaging content

Quantity per pack1 pc(s)

RECOMMENDED FOR YOU

Longshore Tides Brice 7 - Person Seating Group with Cushions Longshore Tides Brice 7 - Person Seating Group with Cushions
$790.00 $316.00 Save: 60% off
Promotion last 24 hours!
3dRose lsp_1151_1 Two Raccoons Single Toggle Switch 3dRose lsp_1151_1 Two Raccoons Single Toggle Switch
$36.00 $11.00 Save: 69% off
Promotion last 24 hours!
Latitude Run 80.71'' Upholstered Sleeper Sofa Latitude Run 80.71'' Upholstered Sleeper Sofa
$1,460.00 $584.00 Save: 60% off
Promotion last 24 hours!
Rosecliff Heights Topanga Patio Dining Armchair Rosecliff Heights Topanga Patio Dining Armchair
$223.00 $89.00 Save: 60% off
Promotion last 24 hours!